ECAT ESTOP error is occurring in the UI

baekho

I have currently connected 6 axes and successfully established basic EtherCAT communication. As per your previous advice, I modified the Modes of Operation in the EtherCAT StartUp settings, which enabled communication and ControlWord control (refer to Screenshots 1 & 2).

The problem is that when I access the example UI to test axis control, an ESTOP is triggered. It seems like there might be an issue with the EtherCAT bus. Are there any additional settings I should configure?
I have 6 physical axes connected, but even when I turn off five of them and try to use only one, an ESTOP still occurs on that specific axis.

Philippe

Hi Baek Ho,

I see you have six drives configured. All of them give a "Slave Error". I see that the first drive also reports the Status Word, so this means that EtherCAT communication is up.

To troubleshoot you can follow the guide on this page:
https://docs.motorcortex.io/docs/motorcortex-io-tools/motorcortex-ecat/troubleshoot-ecat/

If that does not help, please post the motorcortex log and mabe relevant section of your dmsg output here so we can help you diagnose the issue.

baekho

Philippe

Thank you for the quick response. Here are my dmesg logs after rebooting the PC and clicking the 'Engage' button in the UI. EtherCAT communication seems to be working, but I’m not sure where the error is occurring.

fastech:~$ dmesg
[ 0.000000] microcode: microcode updated early to revision 0x1a, date = 2024-04-05
[ 0.000000] Linux version 5.15.137-rt71-intel-pk-preempt-rt-mcx (oe-user@oe-host) (x86_64-mcx-linux-gcc (GCC) 11.5.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT_RT Mon Oct 30 17:04:27 UTC 2023
[ 0.000000] Command line: initrd=\microcode.cpio LABEL=Boot root=PARTUUID=0fb79d78-a4a3-420e-8f44-934cbdb6a69c quiet rootwait rootfstype=ext4 console=ttyS0,115200 console=tty0 net.ifnames=0
[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000074273fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000074274000-0x00000000764ddfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000764de000-0x0000000076546fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x0000000076547000-0x00000000765cefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000765cf000-0x0000000076c4efff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000076c4f000-0x0000000076c4ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000076c50000-0x000000007fbfffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001803fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.70 by American Megatrends
[ 0.000000] efi: ACPI=0x76568000 ACPI 2.0=0x76568014 TPMFinalLog=0x7657c000 SMBIOS=0x76a33000 SMBIOS 3.0=0x76a32000 MEMATTR=0x70a52018 ESRT=0x71c94198 RNG=0x764f8018 TPMEventLog=0x708be018
[ 0.000000] random: crng init done
[ 0.000000] SMBIOS 3.3.0 present.
[ 0.000000] DMI: Compulab fitlet3/sbc-flt3, BIOS FLT3.BN.00.11 08/28/2025
[ 0.000000] tsc: Detected 2000.000 MHz processor
[ 0.000000] tsc: Detected 1996.800 MHz TSC
[ 0.001309] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.001312] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.001322] last_pfn = 0x180400 max_arch_pfn = 0x400000000
[ 0.001385] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.001602] last_pfn = 0x76c50 max_arch_pfn = 0x400000000
[ 0.049561] Secure boot disabled
[ 0.049562] RAMDISK: [mem 0x6d849000-0x6e00cfff]
[ 0.049568] ACPI: Early table checksum verification disabled
[ 0.049573] ACPI: RSDP 0x0000000076568014 000024 (v02 ALASKA)
[ 0.049578] ACPI: XSDT 0x0000000076567728 0000E4 (v01 ALASKA A M I 01072009 AMI 01000013)
[ 0.049585] ACPI: FACP 0x0000000076540000 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
[ 0.049591] ACPI: DSDT 0x000000007650F000 030C21 (v02 ALASKA A M I 01072009 INTL 20191213)
[ 0.049596] ACPI: FACS 0x00000000765CD000 000040
[ 0.049598] ACPI: MCFG 0x0000000076544000 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.049602] ACPI: SSDT 0x0000000076541000 002543 (v02 CpuRef CpuSsdt 00003000 INTL 20191213)
[ 0.049605] ACPI: FIDT 0x000000007650E000 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.049608] ACPI: OEM1 0x0000000076546000 000040 (v01 ALASKA ENRGYMGT 01072009 AMI 01000013)
[ 0.049612] ACPI: HPET 0x0000000076545000 000038 (v01 ALASKA A M I 01072009 AMI 01000013)
[ 0.049615] ACPI: APIC 0x000000007650D000 00012C (v03 ALASKA A M I 01072009 AMI 01000013)
[ 0.049618] ACPI: PRAM 0x000000007650C000 000030 (v01 ALASKA A M I 01072009 AMI 01000013)
[ 0.049621] ACPI: RSCI 0x000000007650B000 000030 (v02 ALASKA BOOTSRC 01072009 AMI 01000013)
[ 0.049624] ACPI: SSDT 0x000000007650A000 000EF2 (v02 ALASKA Ther_Rvp 00001000 INTL 20191213)
[ 0.049627] ACPI: SSDT 0x0000000076509000 000826 (v02 INTEL xh_elcrb 00000000 INTL 20191213)
[ 0.049630] ACPI: NHLT 0x0000000076508000 0002DF (v00 ALASKA A M I 01072009 AMI 01000013)
[ 0.049633] ACPI: SSDT 0x0000000076507000 00006B (v02 SaSsdt SaSsdt 00003000 INTL 20191213)
[ 0.049636] ACPI: SSDT 0x0000000076503000 0031B4 (v02 INTEL IgfxSsdt 00003000 INTL 20191213)
[ 0.049639] ACPI: PSDS 0x0000000076502000 000052 (v01 INTEL EDK2 00000005 INTL 0100000D)
[ 0.049642] ACPI: LPIT 0x0000000076501000 000094 (v01 ALASKA A M I 01072009 AMI 01000013)
[ 0.049645] ACPI: WDAT 0x00000000764FF000 000164 (v01 ALASKA A M I 01072009 AMI 01000013)
[ 0.049648] ACPI: SSDT 0x00000000764FE000 000B75 (v02 ALASKA PtidDevc 00001000 INTL 20191213)
[ 0.049651] ACPI: FPDT 0x00000000764FC000 000044 (v01 ALASKA EHL-ULT 01072009 AMI 01000013)
[ 0.049654] ACPI: DMAR 0x00000000764FD000 0000F4 (v01 INTEL EDK2 00000002 01000013)
[ 0.049657] ACPI: SSDT 0x00000000764FB000 000144 (v02 Intel ADebTabl 00001000 INTL 20191213)
[ 0.049660] ACPI: BGRT 0x00000000764FA000 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.049663] ACPI: TPM2 0x00000000764F9000 00004C (v04 ALASKA A M I 00000001 AMI 00000000)
[ 0.049666] ACPI: WSMT 0x0000000076500000 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.049669] ACPI: Reserving FACP table memory at [mem 0x76540000-0x76540113]
[ 0.049671] ACPI: Reserving DSDT table memory at [mem 0x7650f000-0x7653fc20]
[ 0.049672] ACPI: Reserving FACS table memory at [mem 0x765cd000-0x765cd03f]
[ 0.049673] ACPI: Reserving MCFG table memory at [mem 0x76544000-0x7654403b]
[ 0.049674] ACPI: Reserving SSDT table memory at [mem 0x76541000-0x76543542]
[ 0.049675] ACPI: Reserving FIDT table memory at [mem 0x7650e000-0x7650e09b]
[ 0.049676] ACPI: Reserving OEM1 table memory at [mem 0x76546000-0x7654603f]
[ 0.049677] ACPI: Reserving HPET table memory at [mem 0x76545000-0x76545037]
[ 0.049678] ACPI: Reserving APIC table memory at [mem 0x7650d000-0x7650d12b]
[ 0.049679] ACPI: Reserving PRAM table memory at [mem 0x7650c000-0x7650c02f]
[ 0.049680] ACPI: Reserving RSCI table memory at [mem 0x7650b000-0x7650b02f]
[ 0.049681] ACPI: Reserving SSDT table memory at [mem 0x7650a000-0x7650aef1]
[ 0.049682] ACPI: Reserving SSDT table memory at [mem 0x76509000-0x76509825]
[ 0.049683] ACPI: Reserving NHLT table memory at [mem 0x76508000-0x765082de]
[ 0.049684] ACPI: Reserving SSDT table memory at [mem 0x76507000-0x7650706a]
[ 0.049685] ACPI: Reserving SSDT table memory at [mem 0x76503000-0x765061b3]
[ 0.049686] ACPI: Reserving PSDS table memory at [mem 0x76502000-0x76502051]
[ 0.049687] ACPI: Reserving LPIT table memory at [mem 0x76501000-0x76501093]
[ 0.049688] ACPI: Reserving WDAT table memory at [mem 0x764ff000-0x764ff163]
[ 0.049689] ACPI: Reserving SSDT table memory at [mem 0x764fe000-0x764feb74]
[ 0.049690] ACPI: Reserving FPDT table memory at [mem 0x764fc000-0x764fc043]
[ 0.049690] ACPI: Reserving DMAR table memory at [mem 0x764fd000-0x764fd0f3]
[ 0.049691] ACPI: Reserving SSDT table memory at [mem 0x764fb000-0x764fb143]
[ 0.049692] ACPI: Reserving BGRT table memory at [mem 0x764fa000-0x764fa037]
[ 0.049693] ACPI: Reserving TPM2 table memory at [mem 0x764f9000-0x764f904b]
[ 0.049694] ACPI: Reserving WSMT table memory at [mem 0x76500000-0x76500027]
[ 0.049742] Zone ranges:
[ 0.049742] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.049745] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.049747] Normal [mem 0x0000000100000000-0x00000001803fffff]
[ 0.049749] Movable zone start for each node
[ 0.049750] Early memory node ranges
[ 0.049750] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.049752] node 0: [mem 0x0000000000100000-0x0000000074273fff]
[ 0.049754] node 0: [mem 0x0000000076c4f000-0x0000000076c4ffff]
[ 0.049755] node 0: [mem 0x0000000100000000-0x00000001803fffff]
[ 0.049757] Initmem setup node 0 [mem 0x0000000000001000-0x00000001803fffff]
[ 0.049762] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.049797] On node 0, zone DMA: 97 pages in unavailable ranges
[ 0.055126] On node 0, zone DMA32: 10715 pages in unavailable ranges
[ 0.061056] On node 0, zone Normal: 5040 pages in unavailable ranges
[ 0.061506] On node 0, zone Normal: 31744 pages in unavailable ranges
[ 0.061531] Reserving Intel graphics memory at [mem 0x7c000000-0x7fbfffff]
[ 0.061978] ACPI: PM-Timer IO Port: 0x1808
[ 0.061987] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.061989] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.061990] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.061991] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.061992] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.061993] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.061994] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.061994] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.061995] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
[ 0.061996] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
[ 0.061997] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
[ 0.061997] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
[ 0.061998] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
[ 0.061999] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
[ 0.062000] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
[ 0.062000] ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
[ 0.062041] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.062045] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.062048] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.062052] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.062054] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.062060] TSC deadline timer available
[ 0.062061] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.062099] [mem 0x7fc00000-0xbfffffff] available for PCI devices
[ 0.062108] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.062116] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.062545] percpu: Embedded 52 pages/cpu s172080 r8192 d32720 u524288
[ 0.062554] pcpu-alloc: s172080 r8192 d32720 u524288 alloc=1*2097152
[ 0.062557] pcpu-alloc: [0] 0 1 2 3
[ 0.062583] Built 1 zonelists, mobility grouping on. Total pages: 985179
[ 0.062586] Kernel command line: initrd=\microcode.cpio LABEL=Boot root=PARTUUID=0fb79d78-a4a3-420e-8f44-934cbdb6a69c quiet rootwait rootfstype=ext4 console=ttyS0,115200 console=tty0 net.ifnames=0
[ 0.062665] Unknown kernel command line parameters "LABEL=Boot", will be passed to user space.
[ 0.063352] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.063722] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.063765] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.102345] Memory: 3827432K/4003916K available (16395K kernel code, 2143K rwdata, 4024K rodata, 1940K init, 1884K bss, 176224K reserved, 0K cma-reserved)
[ 0.102422] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.102454] ftrace: allocating 48044 entries in 188 pages
[ 0.132955] ftrace: allocated 188 pages with 5 groups
[ 0.133069] rcu: Preemptible hierarchical RCU implementation.
[ 0.133070] rcu: RCU event tracing is enabled.
[ 0.133071] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[ 0.133072] rcu: RCU_SOFTIRQ processing moved to rcuc kthreads.
[ 0.133073] No expedited grace period (rcu_normal_after_boot).
[ 0.133073] Trampoline variant of Tasks RCU enabled.
[ 0.133074] Rude variant of Tasks RCU enabled.
[ 0.133075] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.133076] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.139541] NR_IRQS: 4352, nr_irqs: 1024, preallocated irqs: 16
[ 0.139840] rcu: Offload RCU callbacks from CPUs: (none).
[ 0.140012] Console: colour dummy device 80x25
[ 0.140016] printk: console [tty0] enabled
[ 0.140053] printk: console [ttyS0] enabled
[ 0.140062] ACPI: Core revision 20210730
[ 0.140318] hpet: HPET dysfunctional in PC10. Force disabled.
[ 0.140319] APIC: Switch to symmetric I/O mode setup
[ 0.140322] DMAR: Host address width 39
[ 0.140323] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.140330] DMAR: dmar0: reg_base_addr fed90000 ver 4:0 cap 1c0000c40660462 ecap 49e2ff0505e
[ 0.140334] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.140338] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.140342] DMAR: RMRR base: 0x0000007b800000 end: 0x0000007fbfffff
[ 0.140344] DMAR: ANDD device: 3 name: _SB.PC00.DMA0
[ 0.140346] DMAR: ANDD device: 4 name: _SB.PC00.DMA1
[ 0.140346] DMAR: ANDD device: 5 name: _SB.PC00.DMA2
[ 0.140349] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.140350] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.140352] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[ 0.140352] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[ 0.142500] DMAR-IR: Enabled IRQ remapping in xapic mode
[ 0.142502] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.147321] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3990bec8342, max_idle_ns: 881590769617 ns
[ 0.147328] Calibrating delay loop (skipped), value calculated using timer frequency.. 3993.60 BogoMIPS (lpj=1996800)
[ 0.147363] CPU0: Thermal monitoring enabled (TM1)
[ 0.147366] x86/cpu: User Mode Instruction Prevention (UMIP) activated
[ 0.147425] process: using mwait in idle threads
[ 0.147427] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.147428] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.147431] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.147433] Spectre V2 : Mitigation: Enhanced IBRS
[ 0.147434] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.147436] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.147437] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.147439] MMIO Stale Data: Mitigation: Clear CPU buffers
[ 0.147440] SRBDS: Vulnerable: No microcode
[ 0.147445] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.147446] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.147448] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'compacted' format.
[ 0.148327] Freeing SMP alternatives memory: 48K
[ 0.148327] pid_max: default: 32768 minimum: 301
[ 0.148327] LSM: Security Framework initializing
[ 0.148327] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.148327] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.148327] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1024
[ 0.148327] smpboot: CPU0: Intel Atom(R) x6425E Processor @ 2.00GHz (family: 0x6, model: 0x96, stepping: 0x1)
[ 0.148327] Performance Events: PEBS fmt4+-baseline, PEBS-via-PT, AnyThread deprecated, Tremont events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.148327] ... version: 5
[ 0.148327] ... bit width: 48
[ 0.148327] ... generic registers: 4
[ 0.148327] ... value mask: 0000ffffffffffff
[ 0.148327] ... max period: 00007fffffffffff
[ 0.148327] ... fixed-purpose events: 3
[ 0.148327] ... event mask: 000000070000000f
[ 0.148327] signal: max sigframe size: 1520
[ 0.148327] rcu: Hierarchical SRCU implementation.
[ 0.148327] smp: Bringing up secondary CPUs ...
[ 0.148327] x86: Booting SMP configuration:
[ 0.148327] .... node #0, CPUs: #1 #2 #3
[ 0.157463] smp: Brought up 1 node, 4 CPUs
[ 0.157469] smpboot: Max logical packages: 1
[ 0.157470] smpboot: Total of 4 processors activated (15974.40 BogoMIPS)
[ 0.158172] devtmpfs: initialized
[ 0.158494] ACPI: PM: Registering ACPI NVS region [mem 0x76547000-0x765cefff] (557056 bytes)
[ 0.158585] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.158590] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.158663] pinctrl core: initialized pinctrl subsystem
[ 0.158843] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.159153] thermal_sys: Registered thermal governor 'step_wise'
[ 0.159155] thermal_sys: Registered thermal governor 'user_space'
[ 0.159206] cpuidle: using governor ladder
[ 0.159189] ACPI: bus type PCI registered
[ 0.159189] dca service started, version 1.12.1
[ 0.159189] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000)
[ 0.159189] PCI: MMCONFIG at [mem 0xc0000000-0xcfffffff] reserved in E820
[ 0.159189] PCI: Using configuration type 1 for base access
[ 0.159636] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.164331] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.164605] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.165113] cryptd: max_cpu_qlen set to 1000
[ 0.182334] raid6: sse2x4 gen() 7791 MB/s
[ 0.199277] raid6: sse2x4 xor() 4913 MB/s
[ 0.216280] raid6: sse2x2 gen() 9509 MB/s
[ 0.233280] raid6: sse2x2 xor() 5441 MB/s
[ 0.250283] raid6: sse2x1 gen() 8475 MB/s
[ 0.267290] raid6: sse2x1 xor() 5239 MB/s
[ 0.267291] raid6: using algorithm sse2x2 gen() 9509 MB/s
[ 0.267292] raid6: .... xor() 5441 MB/s, rmw enabled
[ 0.267294] raid6: using ssse3x2 recovery algorithm
[ 0.267408] ACPI: Added _OSI(Module Device)
[ 0.267409] ACPI: Added _OSI(Processor Device)
[ 0.267410] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.267411] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.267413] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.267415] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.267416] ACPI: Added OSI(Linux-HPI-Hybrid-Graphics)
[ 0.349473] ACPI: 8 ACPI AML tables successfully acquired and loaded
[ 0.364592] ACPI: Dynamic OEM Table Load:
[ 0.364605] ACPI: SSDT 0xFFFF91C6C0C37200 000101 (v02 PmRef Cpu0Psd 00003000 INTL 20191213)
[ 0.366401] ACPI: _SB.PR00: OSC native thermal LVT Acked
[ 0.369136] ACPI: Dynamic OEM Table Load:
[ 0.369144] ACPI: SSDT 0xFFFF91C6C0F19800 0003B7 (v02 PmRef Cpu0Cst 00003001 INTL 20191213)
[ 0.371111] ACPI: Dynamic OEM Table Load:
[ 0.371118] ACPI: SSDT 0xFFFF91C6C0C82800 000437 (v02 PmRef Cpu0Ist 00003000 INTL 20191213)
[ 0.373732] ACPI: Dynamic OEM Table Load:
[ 0.373740] ACPI: SSDT 0xFFFF91C6C0E59000 0008E7 (v02 PmRef ApIst 00003000 INTL 20191213)
[ 0.376059] ACPI: Dynamic OEM Table Load:
[ 0.376067] ACPI: SSDT 0xFFFF91C6C0C83800 00048A (v02 PmRef ApHwp 00003000 INTL 20191213)
[ 0.378166] ACPI: Dynamic OEM Table Load:
[ 0.378173] ACPI: SSDT 0xFFFF91C6C0C84800 0004D2 (v02 PmRef ApPsd 00003000 INTL 20191213)
[ 0.380301] ACPI: Dynamic OEM Table Load:
[ 0.380308] ACPI: SSDT 0xFFFF91C6C0C85000 00048A (v02 PmRef ApCst 00003000 INTL 20191213)
[ 0.387537] ACPI: Interpreter enabled
[ 0.387606] ACPI: PM: (supports S0 S3 S5)
[ 0.387607] ACPI: Using IOAPIC for interrupt routing
[ 0.387678] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.389780] ACPI: Enabled 14 GPEs in block 00 to 7F
[ 0.420112] ACPI Warning: _SB.PC00.OUA3.DSD: Return Package is too small - found 1 elements, expected 2 (20210730/nsprepkg-362)
[ 0.421455] ACPI: PM: Power Resource [WRST]
[ 0.440999] ACPI: PM: Power Resource [FN00]
[ 0.441059] ACPI: PM: Power Resource [FN01]
[ 0.441118] ACPI: PM: Power Resource [FN02]
[ 0.441176] ACPI: PM: Power Resource [FN03]
[ 0.441233] ACPI: PM: Power Resource [FN04]
[ 0.442767] ACPI: PM: Power Resource [PIN]
[ 0.443352] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe])
[ 0.443362] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.444183] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability LTR]
[ 0.444733] PCI host bridge to bus 0000:00
[ 0.444735] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.444738] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.444740] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.444742] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.444744] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.444746] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.444747] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.444749] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.444750] pci_bus 0000:00: root bus resource [mem 0x7fc00000-0xbfffffff window]
[ 0.444752] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x7fffffffff window]
[ 0.444755] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.445198] pci 0000:00:00.0: [8086:452a] type 00 class 0x060000
[ 0.446287] pci 0000:00:02.0: [8086:4571] type 00 class 0x030000
[ 0.446303] pci 0000:00:02.0: reg 0x10: [mem 0x6000000000-0x6000ffffff 64bit]
[ 0.446314] pci 0000:00:02.0: reg 0x18: [mem 0x4000000000-0x400fffffff 64bit pref]
[ 0.446321] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 0.446348] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.446353] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.446904] pci 0000:00:08.0: [8086:4511] type 00 class 0x088000
[ 0.446916] pci 0000:00:08.0: reg 0x10: [mem 0x60013ae000-0x60013aefff 64bit]
[ 0.447826] pci 0000:00:11.0: [8086:4b96] type 00 class 0x078008
[ 0.447850] pci 0000:00:11.0: reg 0x10: [mem 0x60013a2000-0x60013a3fff 64bit]
[ 0.447940] pci 0000:00:11.0: PME# supported from D0 D3hot
[ 0.448577] pci 0000:00:11.1: [8086:4b97] type 00 class 0x078009
[ 0.448601] pci 0000:00:11.1: reg 0x10: [mem 0x60013a0000-0x60013a1fff 64bit]
[ 0.448691] pci 0000:00:11.1: PME# supported from D0 D3hot
[ 0.449353] pci 0000:00:13.0: [8086:4b84] type 00 class 0x0c8014
[ 0.449374] pci 0000:00:13.0: reg 0x10: [mem 0x600139e000-0x600139ffff 64bit]
[ 0.449450] pci 0000:00:13.0: PME# supported from D0 D3hot
[ 0.450122] pci 0000:00:14.0: [8086:4b7d] type 00 class 0x0c0330
[ 0.450147] pci 0000:00:14.0: reg 0x10: [mem 0x6001380000-0x600138ffff 64bit]
[ 0.450252] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.450898] pci 0000:00:14.2: [8086:4b7f] type 00 class 0x050000
[ 0.450922] pci 0000:00:14.2: reg 0x10: [mem 0x6001394000-0x6001397fff 64bit]
[ 0.450938] pci 0000:00:14.2: reg 0x18: [mem 0x60013ad000-0x60013adfff 64bit]
[ 0.451940] pci 0000:00:15.0: [8086:4b78] type 00 class 0x0c8000
[ 0.452013] pci 0000:00:15.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ 0.453163] pci 0000:00:15.2: [8086:4b7a] type 00 class 0x0c8000
[ 0.453237] pci 0000:00:15.2: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ 0.454417] pci 0000:00:15.3: [8086:4b7b] type 00 class 0x0c8000
[ 0.454495] pci 0000:00:15.3: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ 0.455576] pci 0000:00:16.0: [8086:4b70] type 00 class 0x078000
[ 0.455603] pci 0000:00:16.0: reg 0x10: [mem 0x60013a9000-0x60013a9fff 64bit]
[ 0.455706] pci 0000:00:16.0: PME# supported from D3hot
[ 0.456943] pci 0000:00:17.0: [8086:4b63] type 00 class 0x010601
[ 0.456963] pci 0000:00:17.0: reg 0x10: [mem 0x7fc00000-0x7fc01fff]
[ 0.456975] pci 0000:00:17.0: reg 0x14: [mem 0x7fc03000-0x7fc030ff]
[ 0.456985] pci 0000:00:17.0: reg 0x18: [io 0x3090-0x3097]
[ 0.456997] pci 0000:00:17.0: reg 0x1c: [io 0x3080-0x3083]
[ 0.457007] pci 0000:00:17.0: reg 0x20: [io 0x3060-0x307f]
[ 0.457018] pci 0000:00:17.0: reg 0x24: [mem 0x7fc02000-0x7fc027ff]
[ 0.457076] pci 0000:00:17.0: PME# supported from D3hot
[ 0.458401] pci 0000:00:19.0: [8086:4b4b] type 00 class 0x0c8000
[ 0.458479] pci 0000:00:19.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ 0.459640] pci 0000:00:19.2: [8086:4b4d] type 00 class 0x078000
[ 0.459719] pci 0000:00:19.2: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ 0.460876] pci 0000:00:1b.0: [8086:4bb9] type 00 class 0x0c8000
[ 0.460897] pci 0000:00:1b.0: reg 0x10: [mem 0x600139c000-0x600139dfff 64bit]
[ 0.460975] pci 0000:00:1b.0: PME# supported from D0 D3hot
[ 0.461607] pci 0000:00:1b.1: [8086:4bba] type 00 class 0x0c8001
[ 0.461627] pci 0000:00:1b.1: reg 0x10: [mem 0x600139a000-0x600139bfff 64bit]
[ 0.461705] pci 0000:00:1b.1: PME# supported from D0 D3hot
[ 0.462354] pci 0000:00:1b.6: [8086:4bbf] type 00 class 0x0c8006
[ 0.462375] pci 0000:00:1b.6: reg 0x10: [mem 0x6001398000-0x6001399fff 64bit]
[ 0.462453] pci 0000:00:1b.6: PME# supported from D0 D3hot
[ 0.463095] pci 0000:00:1c.0: [8086:4b38] type 01 class 0x060400
[ 0.463222] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.464670] pci 0000:00:1c.4: [8086:4b3c] type 01 class 0x060400
[ 0.464811] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.466237] pci 0000:00:1c.6: [8086:4b3e] type 01 class 0x060400
[ 0.466378] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.467797] pci 0000:00:1d.0: [8086:4bb3] type 00 class 0x088035
[ 0.467818] pci 0000:00:1d.0: reg 0x10: [mem 0x6001000000-0x60011fffff 64bit]
[ 0.467896] pci 0000:00:1d.0: PME# supported from D0 D3hot
[ 0.469097] pci 0000:00:1d.1: [8086:4ba1] type 00 class 0x020018
[ 0.469120] pci 0000:00:1d.1: reg 0x10: [mem 0x6001340000-0x600137ffff 64bit]
[ 0.469211] pci 0000:00:1d.1: PME# supported from D0 D3hot
[ 0.469846] pci 0000:00:1d.2: [8086:4bb1] type 00 class 0x020019
[ 0.469870] pci 0000:00:1d.2: reg 0x10: [mem 0x6001300000-0x600133ffff 64bit]
[ 0.469959] pci 0000:00:1d.2: PME# supported from D0 D3hot
[ 0.470701] pci 0000:00:1e.0: [8086:4b28] type 00 class 0x078000
[ 0.470778] pci 0000:00:1e.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ 0.471998] pci 0000:00:1e.1: [8086:4b29] type 00 class 0x078000
[ 0.472077] pci 0000:00:1e.1: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ 0.473258] pci 0000:00:1f.0: [8086:4b00] type 00 class 0x060100
[ 0.474358] pci 0000:00:1f.3: [8086:4b58] type 00 class 0x040300
[ 0.474403] pci 0000:00:1f.3: reg 0x10: [mem 0x6001390000-0x6001393fff 64bit]
[ 0.474458] pci 0000:00:1f.3: reg 0x20: [mem 0x6001200000-0x60012fffff 64bit]
[ 0.474568] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.479742] pci 0000:00:1f.4: [8086:4b23] type 00 class 0x0c0500
[ 0.479772] pci 0000:00:1f.4: reg 0x10: [mem 0x60013a4000-0x60013a40ff 64bit]
[ 0.479807] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf]
[ 0.480472] pci 0000:00:1f.5: [8086:4b24] type 00 class 0x0c8000
[ 0.480494] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
[ 0.480953] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.481019] pci 0000:00:1c.4: PCI bridge to [bus 02]
[ 0.481085] pci 0000:00:1c.6: PCI bridge to [bus 03]
[ 0.481119] pci_bus 0000:00: on NUMA node 0
[ 0.484879] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[ 0.485053] ACPI: PCI: Interrupt link LNKB configured for IRQ 1
[ 0.485225] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[ 0.485397] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[ 0.485568] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[ 0.485739] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[ 0.485909] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[ 0.486083] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[ 0.503270] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.503270] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.503270] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.503270] vgaarb: loaded
[ 0.503272] SCSI subsystem initialized
[ 0.503442] libata version 3.00 loaded.
[ 0.503442] ACPI: bus type USB registered
[ 0.503443] usbcore: registered new interface driver usbfs
[ 0.503443] usbcore: registered new interface driver hub
[ 0.503443] usbcore: registered new device driver usb
[ 0.503443] pps_core: LinuxPPS API ver. 1 registered
[ 0.503443] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it
[ 0.503444] PTP clock support registered
[ 0.503980] PCI: Using ACPI for IRQ routing
[ 0.526783] PCI: pci_cache_line_size set to 64 bytes
[ 0.526984] pci 0000:00:1f.5: can't claim BAR 0 [mem 0xfe010000-0xfe010fff]: no compatible bridge window
[ 0.527186] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.527189] e820: reserve RAM buffer [mem 0x74274000-0x77ffffff]
[ 0.527191] e820: reserve RAM buffer [mem 0x76c50000-0x77ffffff]
[ 0.527192] e820: reserve RAM buffer [mem 0x180400000-0x183ffffff]
[ 0.527533] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
[ 0.529832] clocksource: Switched to clocksource tsc-early
[ 0.549086] pnp: PnP ACPI init
[ 0.549473] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.549478] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.549692] system 00:01: [io 0x1854-0x1857] has been reserved
[ 0.550183] system 00:02: [mem 0xfe032000-0xfe032fff] has been reserved
[ 0.550187] system 00:02: [mem 0xfe033000-0xfe033fff] has been reserved
[ 0.551530] system 00:03: [mem 0xfec80000-0xfecfffff] has been reserved
[ 0.551534] system 00:03: [mem 0xfeda0000-0xfeda0fff] has been reserved
[ 0.551536] system 00:03: [mem 0xfeda1000-0xfeda1fff] has been reserved
[ 0.551538] system 00:03: [mem 0xc0000000-0xcfffffff] has been reserved
[ 0.551540] system 00:03: [mem 0xfed20000-0xfed7ffff] could not be reserved
[ 0.551543] system 00:03: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.551545] system 00:03: [mem 0xfed45000-0xfed8ffff] could not be reserved
[ 0.551548] system 00:03: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.552748] system 00:04: [io 0x1800-0x18fe] could not be reserved
[ 0.552752] system 00:04: [mem 0xfd000000-0xfd68ffff] has been reserved
[ 0.552754] system 00:04: [mem 0xfd6f0000-0xfdffffff] has been reserved
[ 0.552756] system 00:04: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.552758] system 00:04: [mem 0xfe200000-0xfe7fffff] has been reserved
[ 0.552761] system 00:04: [mem 0xff000000-0xffffffff] has been reserved
[ 0.552763] system 00:04: [mem 0xfd6b0000-0xfd6cffff] has been reserved
[ 0.553252] system 00:05: [io 0x2000-0x20fe] has been reserved

baekho

[ 0.554595] pnp: PnP ACPI: found 7 devices
[ 0.561170] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.561271] NET: Registered PF_INET protocol family
[ 0.561390] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.562299] tcp_listen_portaddr_hash hash table entries: 2048 (order: 4, 98304 bytes, linear)
[ 0.562319] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.562323] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.562418] TCP bind hash table entries: 32768 (order: 8, 1310720 bytes, linear)
[ 0.562629] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.562680] UDP hash table entries: 2048 (order: 5, 196608 bytes, linear)
[ 0.562718] UDP-Lite hash table entries: 2048 (order: 5, 196608 bytes, linear)
[ 0.562804] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.562970] RPC: Registered named UNIX socket transport module.
[ 0.562972] RPC: Registered udp transport module.
[ 0.562973] RPC: Registered tcp transport module.
[ 0.562974] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.563004] pci 0000:00:15.0: BAR 0: assigned [mem 0x4010000000-0x4010000fff 64bit]
[ 0.563070] pci 0000:00:15.2: BAR 0: assigned [mem 0x4010001000-0x4010001fff 64bit]
[ 0.563131] pci 0000:00:15.3: BAR 0: assigned [mem 0x4010002000-0x4010002fff 64bit]
[ 0.563190] pci 0000:00:19.0: BAR 0: assigned [mem 0x4010003000-0x4010003fff 64bit]
[ 0.563249] pci 0000:00:19.2: BAR 0: assigned [mem 0x4010004000-0x4010004fff 64bit]
[ 0.563311] pci 0000:00:1e.0: BAR 0: assigned [mem 0x4010005000-0x4010005fff 64bit]
[ 0.563370] pci 0000:00:1e.1: BAR 0: assigned [mem 0x4010006000-0x4010006fff 64bit]
[ 0.563478] pci 0000:00:1f.5: BAR 0: assigned [mem 0x7fc04000-0x7fc04fff]
[ 0.563494] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.563513] pci 0000:00:1c.4: PCI bridge to [bus 02]
[ 0.563526] pci 0000:00:1c.6: PCI bridge to [bus 03]
[ 0.563540] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.563542] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.563544] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.563545] pci_bus 0000:00: resource 7 [mem 0x000e0000-0x000e3fff window]
[ 0.563547] pci_bus 0000:00: resource 8 [mem 0x000e4000-0x000e7fff window]
[ 0.563549] pci_bus 0000:00: resource 9 [mem 0x000e8000-0x000ebfff window]
[ 0.563550] pci_bus 0000:00: resource 10 [mem 0x000ec000-0x000effff window]
[ 0.563552] pci_bus 0000:00: resource 11 [mem 0x000f0000-0x000fffff window]
[ 0.563553] pci_bus 0000:00: resource 12 [mem 0x7fc00000-0xbfffffff window]
[ 0.563555] pci_bus 0000:00: resource 13 [mem 0x4000000000-0x7fffffffff window]
[ 0.564620] PCI: CLS 0 bytes, default 64
[ 0.564631] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.564632] software IO TLB: mapped [mem 0x0000000069849000-0x000000006d849000] (64MB)
[ 0.564639] DMAR: ACPI device "80864BB4:00" under DMAR at fed91000 as 00:1d.3
[ 0.564644] DMAR: ACPI device "80864BB5:00" under DMAR at fed91000 as 00:1d.4
[ 0.564647] DMAR: ACPI device "80864BB6:00" under DMAR at fed91000 as 00:1d.5
[ 0.564734] Trying to unpack rootfs image as initramfs...
[ 0.569839] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3990bec8342, max_idle_ns: 881590769617 ns
[ 0.569864] clocksource: Switched to clocksource tsc
[ 0.569942] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 0.570602] Freeing initrd memory: 7952K
[ 0.715264] Initialise system trusted keyrings
[ 0.715351] workingset: timestamp_bits=46 max_order=20 bucket_order=0
[ 0.719318] NFS: Registering the id_resolver key type
[ 0.719340] Key type id_resolver registered
[ 0.719341] Key type id_legacy registered
[ 0.719357] ntfs: driver 2.1.32 [Flags: R/W].
[ 0.733032] xor: measuring software checksum speed
[ 0.733735] prefetch64-sse : 14275 MB/sec
[ 0.734511] generic_sse : 12819 MB/sec
[ 0.734513] xor: using function: prefetch64-sse (14275 MB/sec)
[ 0.734516] Key type asymmetric registered
[ 0.734517] Asymmetric key parser 'x509' registered
[ 0.734538] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 0.734540] io scheduler mq-deadline registered
[ 0.734542] io scheduler kyber registered
[ 0.735211] pcieport 0000:00:1c.0: PME: Signaling with IRQ 122
[ 0.735746] pcieport 0000:00:1c.4: PME: Signaling with IRQ 123
[ 0.736256] pcieport 0000:00:1c.6: PME: Signaling with IRQ 124
[ 0.736862] Monitor-Mwait will be used to enter C-1 state
[ 0.736872] Monitor-Mwait will be used to enter C-2 state
[ 0.736879] Monitor-Mwait will be used to enter C-3 state
[ 0.736884] ACPI: _SB.PR00: Found 3 idle states
[ 0.737421] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[ 0.737462] ACPI: button: Sleep Button [SLPB]
[ 0.737514] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.738417] ACPI: button: Power Button [PWRB]
[ 0.738488] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.739416] ACPI: button: Power Button [PWRF]
[ 0.739686] ACPI BIOS Error (bug): Could not resolve symbol [_SB.PR00.CPC], AE_NOT_FOUND (20210730/psargs-330)
[ 0.739695] ACPI Error: Aborting method _SB.PR01.CPC due to previous error (AE_NOT_FOUND) (20210730/psparse-529)
[ 0.739760] ACPI BIOS Error (bug): Could not resolve symbol [_SB.PR00.CPC], AE_NOT_FOUND (20210730/psargs-330)
[ 0.739766] ACPI Error: Aborting method _SB.PR02.CPC due to previous error (AE_NOT_FOUND) (20210730/psparse-529)
[ 0.739827] ACPI BIOS Error (bug): Could not resolve symbol [_SB.PR00.CPC], AE_NOT_FOUND (20210730/psargs-330)
[ 0.739833] ACPI Error: Aborting method _SB.PR03._CPC due to previous error (AE_NOT_FOUND) (20210730/psparse-529)
[ 0.740869] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.740872] ACPI: thermal: Thermal Zone [TZ00] (0 C)
[ 0.740951] ioatdma: Intel(R) QuickData Technology Driver 5.00
[ 0.741109] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.742197] printk: console [ttyS0] disabled
[ 0.742222] 0000:00:11.0: ttyS0 at MMIO 0x60013a2000 (irq = 125, base_baud = 12500000) is a 16550A
[ 0.742240] printk: console [ttyS0] enabled
[ 0.742793] 0000:00:11.1: ttyS1 at MMIO 0x60013a0000 (irq = 126, base_baud = 12500000) is a 16550A
[ 0.743190] hpet_acpi_add: no address or irqs in _CRS
[ 0.743470] Linux agpgart interface v0.103
[ 0.753993] ACPI: bus type drm_connector registered
[ 0.755045] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 0.755115] i915 0000:00:02.0: [drm] Transparent Hugepage support is recommended for optimal performance on this platform!
[ 0.757162] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 0.757202] i915 0000:00:02.0: [drm] Failed to load DMC firmware i915/icl_dmc_ver1_09.bin. Disabling runtime power management.
[ 0.757205] i915 0000:00:02.0: [drm] DMC firmware homepage: https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/i915
[ 0.783087] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
[ 0.784563] ACPI: video: [Firmware Bug]: ACPI(GFX0) defines _DOD but not _DOS
[ 0.786178] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 0.786604] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[ 0.790743] brd: module loaded
[ 0.792746] loop: module loaded
[ 0.804432] intel-lpss 0000:00:15.0: enabling device (0004 -> 0006)
[ 0.804998] idma64 idma64.0: Found Intel integrated DMA 64-bit
[ 0.815658] fbcon: i915drmfb (fb0) is primary device
[ 0.826434] intel-lpss 0000:00:15.2: enabling device (0004 -> 0006)
[ 0.826978] idma64 idma64.1: Found Intel integrated DMA 64-bit
[ 0.848602] intel-lpss 0000:00:15.3: enabling device (0004 -> 0006)
[ 0.849391] idma64 idma64.2: Found Intel integrated DMA 64-bit
[ 0.851713] Console: switching to colour frame buffer device 240x67
[ 0.871488] intel-lpss 0000:00:19.0: enabling device (0004 -> 0006)
[ 0.872287] idma64 idma64.3: Found Intel integrated DMA 64-bit
[ 0.873319] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[ 0.893449] intel-lpss 0000:00:19.2: enabling device (0000 -> 0002)
[ 0.894109] idma64 idma64.4: Found Intel integrated DMA 64-bit
[ 0.894396] dw-apb-uart.4: ttyS2 at MMIO 0x4010004000 (irq = 33, base_baud = 6250000) is a 16550A
[ 0.907431] intel-lpss 0000:00:1e.0: enabling device (0000 -> 0002)
[ 0.908131] idma64 idma64.5: Found Intel integrated DMA 64-bit
[ 0.908333] dw-apb-uart.5: ttyS3 at MMIO 0x4010005000 (irq = 16, base_baud = 6250000) is a 16550A
[ 0.921428] intel-lpss 0000:00:1e.1: enabling device (0000 -> 0002)
[ 0.922096] idma64 idma64.6: Found Intel integrated DMA 64-bit
[ 0.922211] dw-apb-uart: probe of dw-apb-uart.6 failed with error -28
[ 0.922989] ahci 0000:00:17.0: version 3.0
[ 0.923428] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 0.923432] ahci 0000:00:17.0: flags: 64bit ncq sntf pm clo only pio slum part deso sadm sds
[ 0.924112] scsi host0: ahci
[ 0.924367] scsi host1: ahci
[ 0.924457] ata1: SATA max UDMA/133 abar m2048@0x7fc02000 port 0x7fc02100 irq 128
[ 0.924460] ata2: SATA max UDMA/133 abar m2048@0x7fc02000 port 0x7fc02180 irq 128
[ 0.924590] e100: Intel(R) PRO/100 Network Driver
[ 0.924592] e100: Copyright(c) 1999-2006 Intel Corporation
[ 0.924656] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.924657] ehci-pci: EHCI PCI platform driver
[ 0.924675] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.924683] ohci-pci: OHCI PCI platform driver
[ 0.924699] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.925053] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.925061] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.926401] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
[ 0.927034] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.927040] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.927044] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
[ 0.927329] hub 1-0:1.0: USB hub found
[ 0.927420] hub 1-0:1.0: 10 ports detected
[ 0.929161] hub 2-0:1.0: USB hub found
[ 0.929182] hub 2-0:1.0: 4 ports detected
[ 0.930214] usbcore: registered new interface driver usb-storage
[ 0.930244] usbcore: registered new interface driver usbserial_generic
[ 0.930251] usbserial: USB Serial support registered for generic
[ 0.930261] usbcore: registered new interface driver ftdi_sio
[ 0.930267] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 0.930284] usbcore: registered new interface driver pl2303
[ 0.930291] usbserial: USB Serial support registered for pl2303
[ 0.930331] i8042: PNP: No PS/2 controller found.
[ 0.930445] mousedev: PS/2 mouse device common for all mice
[ 0.930963] rtc_cmos rtc_cmos: RTC can wake from S4
[ 0.932017] rtc_cmos rtc_cmos: registered as rtc0
[ 0.932183] rtc_cmos rtc_cmos: setting system clock to 2026-04-02T09:44:56 UTC (1775123096)
[ 0.932225] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram
[ 0.932795] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 0.935283] i2c i2c-14: 1/2 memory slots populated (from DMI)
[ 0.935827] i2c i2c-14: Successfully instantiated SPD at 0x50
[ 0.936479] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
[ 0.936583] intel_pstate: Intel P-state driver initializing
[ 0.936862] intel_pstate: HWP enabled
[ 0.936886] sdhci: Secure Digital Host Controller Interface driver
[ 0.936886] sdhci: Copyright(c) Pierre Ossman
[ 0.936933] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.936974] hid: raw HID events driver (C) Jiri Kosina
[ 0.937018] usbcore: registered new interface driver usbhid
[ 0.937019] usbhid: USB HID core driver
[ 0.937088] u32 classifier
[ 0.937089] input device check on
[ 0.937090] Actions configured
[ 0.937306] NET: Registered PF_INET6 protocol family
[ 0.937802] Segment Routing with IPv6
[ 0.937810] In-situ OAM (IOAM) with IPv6
[ 0.937833] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 0.938016] NET: Registered PF_PACKET protocol family
[ 0.938077] NET: Registered PF_IEEE802154 protocol family
[ 0.938088] Key type dns_resolver registered
[ 0.938281] NET: Registered PF_VSOCK protocol family
[ 0.938946] microcode: sig=0x90661, pf=0x1, revision=0x1a
[ 0.938968] microcode: Microcode Update Driver: v2.2.
[ 0.938973] IPI shorthand broadcast: enabled
[ 0.938981] SSE version of gcm_enc/dec engaged.
[ 0.940312] sched_clock: Marking stable (932915839, 7373648)->(971802564, -31513077)
[ 0.940388] printk: console [tty0]: printing thread started
[ 0.940413] printk: console [ttyS0]: printing thread started
[ 0.940504] Loading compiled-in X.509 certificates
[ 0.961306] Key type .fscrypt registered
[ 0.961309] Key type fscrypt-provisioning registered
[ 0.962018] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no
[ 0.963004] Key type encrypted registered
[ 0.972021] printk: console [netcon0]: printing thread started
[ 0.972429] printk: console [netcon0] enabled
[ 0.972432] netconsole: network logging started
[ 1.164563] usb 1-6: new full-speed USB device number 2 using xhci_hcd
[ 1.235323] ata2: SATA link down (SStatus 4 SControl 300)
[ 1.235395] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.236666] ata1.00: ATA-9: TS128GMTS600S, S0903D, max UDMA/133
[ 1.236749] ata1.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 1.237603] ata1.00: Features: Dev-Sleep
[ 1.239075] ata1.00: configured for UDMA/133
[ 1.239479] scsi 0:0:0:0: Direct-Access ATA TS128GMTS600S 3D PQ: 0 ANSI: 5
[ 1.240684] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.241219] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 1.241324] sd 0:0:0:0: [sda] Write Protect is off
[ 1.241333] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.241554] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.246612] sda: sda1 sda2
[ 1.247201] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.247245] md: Waiting for all devices to be available before autodetect
[ 1.247247] md: If you don't use raid, use raid=noautodetect
[ 1.247249] md: Autodetecting RAID arrays.
[ 1.247250] md: autorun ...
[ 1.247250] md: ... autorun DONE.
[ 1.253681] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[ 1.253702] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
[ 1.254058] devtmpfs: mounted
[ 1.257534] Freeing unused kernel image (initmem) memory: 1940K
[ 1.257544] Write protecting the kernel read-only data: 22528k
[ 1.259768] Freeing unused kernel image (text/rodata gap) memory: 2036K
[ 1.259991] Freeing unused kernel image (rodata/data gap) memory: 72K
[ 1.260004] Run /sbin/init as init process
[ 1.260006] with arguments:
[ 1.260007] /sbin/init
[ 1.260009] with environment:
[ 1.260010] HOME=/
[ 1.260012] TERM=linux
[ 1.260013] LABEL=Boot
[ 1.297457] input: KYERIM 307UT USB Keyboard with Trackball as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:14A4:0103.0001/input/input4
[ 1.350089] hid-generic 0003:14A4:0103.0001: input,hidraw0: USB HID v1.10 Keyboard [KYERIM 307UT USB Keyboard with Trackball] on usb-0000:00:14.0-6/input0
[ 1.351928] input: KYERIM 307UT USB Keyboard with Trackball as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.1/0003:14A4:0103.0002/input/input5
[ 1.352204] systemd[1]: systemd 250.5+ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid)
[ 1.352442] hid-generic 0003:14A4:0103.0002: input,hidraw1: USB HID v1.10 Mouse [KYERIM 307UT USB Keyboard with Trackball] on usb-0000:00:14.0-6/input1
[ 1.364925] systemd[1]: Detected architecture x86-64.
[ 1.380204] systemd[1]: Hostname set to <fastech>.
[ 1.411491] 8250_lpss 0000:00:11.0: forbid DMA for kernel console
[ 1.466429] usb 1-8: new high-speed USB device number 3 using xhci_hcd
[ 1.560988] systemd[1]: Queued start job for default target Multi-User System.
[ 1.561001] systemd[1]: Unnecessary job was removed for /sys/subsystem/net/devices/wlan0.
[ 1.572630] systemd[1]: Created slice Slice /system/getty.
[ 1.573261] systemd[1]: Created slice Slice /system/modprobe.
[ 1.573789] systemd[1]: Created slice Slice /system/serial-getty.
[ 1.574368] systemd[1]: Created slice Slice /system/syslog-ng.
[ 1.574927] systemd[1]: Created slice Slice /system/wpa_supplicant.
[ 1.575343] systemd[1]: Created slice User and Session Slice.
[ 1.575455] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 1.575519] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 1.575609] systemd[1]: Reached target Path Units.
[ 1.575630] systemd[1]: Reached target Remote File Systems.
[ 1.575643] systemd[1]: Reached target Slice Units.
[ 1.575666] systemd[1]: Reached target Swaps.
[ 1.575778] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 1.584245] systemd[1]: Journal Audit Socket was skipped because of a failed condition check (ConditionSecurity=audit).
[ 1.584516] systemd[1]: Listening on Journal Socket (/dev/log).
[ 1.584671] systemd[1]: Listening on Journal Socket.
[ 1.584857] systemd[1]: Listening on Network Service Netlink Socket.
[ 1.585032] systemd[1]: Listening on udev Control Socket.
[ 1.585134] systemd[1]: Listening on udev Kernel Socket.
[ 1.585255] systemd[1]: Listening on User Database Manager Socket.
[ 1.586480] systemd[1]: Mounting Huge Pages File System...
[ 1.587683] systemd[1]: Mounting POSIX Message Queue File System...
[ 1.588988] systemd[1]: Mounting Kernel Debug File System...
[ 1.590461] systemd[1]: Mounting Kernel Trace File System...
[ 1.592096] systemd[1]: Mounting Temporary Directory /tmp...
[ 1.592319] systemd[1]: Create List of Static Device Nodes was skipped because of a failed condition check (ConditionFileNotEmpty=/lib/modules/5.15.137-rt71-intel-pk-preempt-rt-mcx/modules.devname).
[ 1.593714] systemd[1]: Starting Load Kernel Module configfs...
[ 1.594982] systemd[1]: Starting Load Kernel Module drm...
[ 1.596286] systemd[1]: Starting Load Kernel Module fuse...
[ 1.598156] systemd[1]: Starting Start psplash boot splash screen...
[ 1.599578] systemd[1]: Starting File System Check on Root Device...
[ 1.599827] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
[ 1.599830] systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
[ 1.600911] ftdi_sio 1-8:1.0: FTDI USB Serial Device converter detected
[ 1.600954] usb 1-8: Detected FT232H
[ 1.601459] systemd[1]: Starting Journal Service...
[ 1.601558] usb 1-8: FTDI USB Serial Device converter now attached to ttyUSB0
[ 1.603529] systemd[1]: Starting Load Kernel Modules...
[ 1.604976] systemd[1]: Starting Generate network units from Kernel command line...
[ 1.606510] systemd[1]: Starting Coldplug All udev Devices...
[ 1.609184] systemd[1]: Mounted Huge Pages File System.
[ 1.609337] systemd[1]: Mounted POSIX Message Queue File System.
[ 1.609518] systemd[1]: Mounted Kernel Debug File System.
[ 1.609669] systemd[1]: Mounted Kernel Trace File System.
[ 1.609696] i2c_dev: i2c /dev entries driver
[ 1.609784] systemd[1]: Mounted Temporary Directory /tmp.
[ 1.610164] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[ 1.610595] systemd[1]: Finished Load Kernel Module configfs.
[ 1.610928] systemd[1]: modprobe@drm.service: Deactivated successfully.
[ 1.611229] systemd[1]: Finished Load Kernel Module drm.
[ 1.611585] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[ 1.611962] systemd[1]: Finished Load Kernel Module fuse.
[ 1.613295] systemd[1]: FUSE Control File System was skipped because of a failed condition check (ConditionPathExists=/sys/fs/fuse/connections).
[ 1.614837] systemd[1]: Mounting Kernel Configuration File System...
[ 1.617183] systemd[1]: Finished Generate network units from Kernel command line.
[ 1.618971] systemd[1]: Mounted Kernel Configuration File System.
[ 1.627092] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 1.629678] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 1.631352] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
[ 1.636602] Intel(R) Wireless WiFi driver for Linux
[ 1.638027] systemd[1]: Finished Load Kernel Modules.
[ 1.640126] systemd[1]: Starting Apply Kernel Variables...
[ 1.649582] systemd[1]: Finished Apply Kernel Variables.
[ 1.653163] systemd[1]: Finished File System Check on Root Device.
[ 1.654971] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 1.655115] systemd[1]: Started Start psplash boot splash screen.
[ 1.656516] systemd[1]: Starting Start psplash-systemd progress communication helper...
[ 1.658640] systemd[1]: Started Start psplash-systemd progress communication helper.
[ 1.665221] EXT4-fs (sda2): re-mounted. Opts: (null). Quota mode: disabled.
[ 1.670237] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 1.670846] systemd[1]: Rebuild Hardware Database was skipped because of a failed condition check (ConditionNeedsUpdate=/etc).
[ 1.670898] systemd[1]: Platform Persistent Storage Archival was skipped because of a failed condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
[ 1.670950] systemd[1]: Create System Users was skipped because of a failed condition check (ConditionNeedsUpdate=/etc).
[ 1.672701] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 1.686087] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 1.686209] systemd[1]: Reached target Preparation for Local File Systems.
[ 1.688262] systemd[1]: Starting Rule-based Manager for Device Events and Files...
[ 1.703769] systemd[1]: Started Journal Service.
[ 1.711565] systemd-journald[190]: Received client request to flush runtime journal.
[ 1.815244] resource sanity check: requesting [mem 0xfdfff75c-0xfe00175b], which spans more than pnp 00:04 [mem 0xfd6f0000-0xfdffffff]
[ 1.815251] caller pmc_core_probe+0xbb/0x640 [intel_pmc_core] mapping multiple BARs
[ 1.815265] intel_pmc_core INT33A1:00: Assuming a default substate order for this platform
[ 1.816880] intel_pmc_core INT33A1:00: initialized
[ 1.945775] intel-eth-pci 0000:00:1d.1: stmmac_config_multi_msi: multi MSI enablement successful
[ 1.946966] intel-eth-pci 0000:00:1d.1: User ID: 0x51, Synopsys ID: 0x52
[ 1.946972] intel-eth-pci 0000:00:1d.1: DWMAC4/5
[ 1.946979] intel-eth-pci 0000:00:1d.1: DMA HW capability register supported
[ 1.946981] intel-eth-pci 0000:00:1d.1: RX Checksum Offload Engine supported
[ 1.946982] intel-eth-pci 0000:00:1d.1: TX Checksum insertion supported
[ 1.946983] intel-eth-pci 0000:00:1d.1: TSO supported
[ 1.946984] intel-eth-pci 0000:00:1d.1: Enable RX Mitigation via HW Watchdog Timer
[ 1.946988] intel-eth-pci 0000:00:1d.1: device MAC address 00:01:c0:3a:8d:48
[ 1.946990] intel-eth-pci 0000:00:1d.1: Enabled L3L4 Flow TC (entries=2)
[ 1.946993] intel-eth-pci 0000:00:1d.1: Enabled RFS Flow TC (entries=10)
[ 1.947000] intel-eth-pci 0000:00:1d.1: Enabling HW TC (entries=256, max_off=256)
[ 1.947002] intel-eth-pci 0000:00:1d.1: TSO feature enabled
[ 1.947003] intel-eth-pci 0000:00:1d.1: Using 32 bits DMA width
[ 2.235693] mdio_bus stmmac-2:01: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-2:01, irq=POLL)
[ 2.250919] mdio_bus stmmac-2:16: xpcs_create: xpcs reset
[ 2.306655] intel-eth-pci 0000:00:1d.2: stmmac_config_multi_msi: multi MSI enablement successful
[ 2.306956] intel-eth-pci 0000:00:1d.2: User ID: 0x51, Synopsys ID: 0x52
[ 2.306968] intel-eth-pci 0000:00:1d.2: DWMAC4/5
[ 2.306978] intel-eth-pci 0000:00:1d.2: DMA HW capability register supported
[ 2.306982] intel-eth-pci 0000:00:1d.2: RX Checksum Offload Engine supported
[ 2.306984] intel-eth-pci 0000:00:1d.2: TX Checksum insertion supported
[ 2.306987] intel-eth-pci 0000:00:1d.2: TSO supported
[ 2.306990] intel-eth-pci 0000:00:1d.2: Enable RX Mitigation via HW Watchdog Timer
[ 2.306996] intel-eth-pci 0000:00:1d.2: device MAC address 00:01:c0:3a:8d:49
[ 2.307004] intel-eth-pci 0000:00:1d.2: Enabled L3L4 Flow TC (entries=2)
[ 2.307009] intel-eth-pci 0000:00:1d.2: Enabled RFS Flow TC (entries=10)
[ 2.307020] intel-eth-pci 0000:00:1d.2: Enabling HW TC (entries=256, max_off=256)
[ 2.307024] intel-eth-pci 0000:00:1d.2: TSO feature enabled
[ 2.307027] intel-eth-pci 0000:00:1d.2: Using 32 bits DMA width
[ 2.601618] mdio_bus stmmac-3:01: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-3:01, irq=POLL)
[ 2.614007] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 2.614416] mdio_bus stmmac-3:16: xpcs_create: xpcs reset
[ 2.960556] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 2.996457] br0: port 1(eth0) entered blocking state
[ 2.996463] br0: port 1(eth0) entered disabled state
[ 2.996579] device eth0 entered promiscuous mode
[ 3.000197] intel-eth-pci 0000:00:1d.2 eth1: PHY [stmmac-3:01] driver [Generic PHY] (irq=POLL)
[ 3.001807] intel-eth-pci 0000:00:1d.2 eth1: Register MEM_TYPE_PAGE_POOL RxQ-0
[ 3.001863] intel-eth-pci 0000:00:1d.2 eth1: Register MEM_TYPE_PAGE_POOL RxQ-1
[ 3.001914] intel-eth-pci 0000:00:1d.2 eth1: Register MEM_TYPE_PAGE_POOL RxQ-2
[ 3.001960] intel-eth-pci 0000:00:1d.2 eth1: Register MEM_TYPE_PAGE_POOL RxQ-3
[ 3.002007] intel-eth-pci 0000:00:1d.2 eth1: Register MEM_TYPE_PAGE_POOL RxQ-4
[ 3.002057] intel-eth-pci 0000:00:1d.2 eth1: Register MEM_TYPE_PAGE_POOL RxQ-5
[ 3.002107] intel-eth-pci 0000:00:1d.2 eth1: Register MEM_TYPE_PAGE_POOL RxQ-6
[ 3.002153] intel-eth-pci 0000:00:1d.2 eth1: Register MEM_TYPE_PAGE_POOL RxQ-7
[ 3.013688] dwmac4: Master AXI performs any burst length
[ 3.013769] intel-eth-pci 0000:00:1d.2 eth1: Enabling Safety Features
[ 3.013814] intel-eth-pci 0000:00:1d.2 eth1: IEEE 1588-2008 Advanced Timestamp supported
[ 3.013918] intel-eth-pci 0000:00:1d.2 eth1: registered PTP clock
[ 3.014073] intel-eth-pci 0000:00:1d.2 eth1: FPE workqueue start
[ 3.014079] intel-eth-pci 0000:00:1d.2 eth1: configuring for inband/sgmii link mode
[ 3.035230] intel-eth-pci 0000:00:1d.2 eth1: TSN interface not found.
[ 3.052654] intel-eth-pci 0000:00:1d.1 eth0: PHY [stmmac-2:01] driver [Generic PHY] (irq=POLL)
[ 3.054015] intel-eth-pci 0000:00:1d.1 eth0: Register MEM_TYPE_PAGE_POOL RxQ-0
[ 3.054069] intel-eth-pci 0000:00:1d.1 eth0: Register MEM_TYPE_PAGE_POOL RxQ-1
[ 3.054118] intel-eth-pci 0000:00:1d.1 eth0: Register MEM_TYPE_PAGE_POOL RxQ-2
[ 3.054164] intel-eth-pci 0000:00:1d.1 eth0: Register MEM_TYPE_PAGE_POOL RxQ-3
[ 3.054210] intel-eth-pci 0000:00:1d.1 eth0: Register MEM_TYPE_PAGE_POOL RxQ-4
[ 3.054259] intel-eth-pci 0000:00:1d.1 eth0: Register MEM_TYPE_PAGE_POOL RxQ-5
[ 3.054308] intel-eth-pci 0000:00:1d.1 eth0: Register MEM_TYPE_PAGE_POOL RxQ-6
[ 3.054355] intel-eth-pci 0000:00:1d.1 eth0: Register MEM_TYPE_PAGE_POOL RxQ-7
[ 3.068461] dwmac4: Master AXI performs any burst length
[ 3.068545] intel-eth-pci 0000:00:1d.1 eth0: Enabling Safety Features
[ 3.068591] intel-eth-pci 0000:00:1d.1 eth0: IEEE 1588-2008 Advanced Timestamp supported
[ 3.070512] intel-eth-pci 0000:00:1d.1 eth0: registered PTP clock
[ 3.070631] intel-eth-pci 0000:00:1d.1 eth0: FPE workqueue start
[ 3.070635] intel-eth-pci 0000:00:1d.1 eth0: configuring for inband/sgmii link mode
[ 3.093673] intel-eth-pci 0000:00:1d.1 eth0: TSN interface not found.
[ 3.099328] br0: port 1(eth0) entered blocking state
[ 3.099334] br0: port 1(eth0) entered forwarding state
[ 3.099399] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
[ 4.031775] br0: port 1(eth0) entered disabled state
[ 5.109270] intel-eth-pci 0000:00:1d.2 eth1: Link is Up - 100Mbps/Full - flow control off
[ 5.109305] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 6.197239] intel-eth-pci 0000:00:1d.1 eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 6.197275] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 6.197448] br0: port 1(eth0) entered blocking state
[ 6.197456] br0: port 1(eth0) entered forwarding state
[ 8.180227] ec_master: loading out-of-tree module taints kernel.
[ 8.184984] EtherCAT: Master driver 1.5.2-vecsyn-5.2 ga6f4181f
[ 8.185291] EtherCAT: 1 master waiting for devices.
[ 8.193440] ec_generic: EtherCAT master generic Ethernet device module 1.5.2-vecsyn-5.2 ga6f4181f
[ 8.193516] EtherCAT: Accepting 00:01:C0:3A:8D:49 as main device for master 0.
[ 8.193536] ec_generic: Binding socket to interface 4 (eth1).
[ 8.206605] EtherCAT 0: Starting EtherCAT-IDLE thread.
[ 8.206818] EtherCAT 0: Link state of ecm0 changed to UP.
[ 8.208545] EtherCAT 0: 6 slave(s) responding on main device.
[ 8.208553] EtherCAT 0: Slave states on main device: PREOP.
[ 8.212253] EtherCAT 0: Scanning bus.
[ 8.481765] EtherCAT 0: Bus scanning completed in 273 ms.
[ 8.481772] EtherCAT 0: Using slave main-0 as DC reference clock.
[ 8.490198] EtherCAT 0: Slave states on main device: INIT, PREOP.
[ 8.505039] EtherCAT 0: Slave states on main device: PREOP.
[ 8.652837] EtherCAT: Requesting master 0...
[ 8.652844] EtherCAT: Successfully requested master 0.
[ 8.819304] acpi device:0f: registered as cooling_device9
[ 8.819915] acpi device:10: registered as cooling_device10
[ 11.535511] EtherCAT 0: Domain0: Logical address 0x00000000, 210 byte, expected working counter 18.
[ 11.535517] EtherCAT 0: Datagram domain0-0-main: Logical offset 0x00000000, 210 byte, type LRW at 00000000bf13ada9.
[ 11.536224] EtherCAT 0: Master thread exited.
[ 11.536228] EtherCAT 0: Starting EtherCAT-OP thread.
[ 11.536902] EtherCAT WARNING 0: 6 datagrams TIMED OUT!
[ 11.536906] EtherCAT WARNING 0: 6 datagrams UNMATCHED!
[ 11.609897] EtherCAT 0: Slave states on main device: INIT.
[ 11.623897] EtherCAT 0: Slave states on main device: PREOP.
[ 11.763896] EtherCAT 0: Slave states on main device: OP.

Philippe

So all the slaves are in "OP" state? Check via terminal command "ethercat slaves".
Are the drives sending data. Check via the DESK tool in the EtherCAT branch of the parameter tree.
Did you link the StatusWord correctly to the DriveLogic?
What is the StatusWord? Look in your drive documentation to decode it.
If the drive is in error state, you can check the relevant SDOs, either via the command line (see "ethercat" command) or adding the SDOs to your EtherCAT configuration, so you can read them via Motorcortex directly and display them in the tree (note that you must trigger an "root/Ethercat/read_sdos" signal to actually update the values.

baekho

Philippe
All EtherCAT slaves are already in the OP state, and the StatusWord appears to be waiting for the 'Servo Enable' command. It also seems that EtherCAT communication has successfully started on the dashboard."

baekho

baekho
"Sorry, I forgot to mention: I’ve updated base.link.json and fixed the other issues. Now, the only problem is a 508 Error that triggers when pressing the 'Engage' button."

philippeH

"508": "ES_NOT_REFERENCED",

In the GUI, Axis settings tab, Press Reference All and try again. Did this resolve you issue?